Grout - 1 kg

Tile Grout

Name: Tile Grout Grout
Brand: Angad Ceramics
Availability: InStock

Strong Bond. Long Life.

Angad Ceramics Tile Grout is a cement based, polymer modified grout formulated with special additives for filling joints between tiles. It delivers a smooth, durable and water resistant finish that resists staining and mold, keeping tiled surfaces looking sharp for years. Suitable for both wall and floor tiles, indoors and outdoors.

Get Pricing on WhatsApp Call Us

Key Features

High Strength & Durable
Water Resistant & Anti-Mold
Smooth Finish & Easy to Clean
Suitable for Wall & Floor Tiles
Interior & Exterior Use

Best Suited For

Ceramic TilesVitrified TilesPorcelain TilesNatural Stone

Recommended Substrates

Tile-to-tile jointsWall tilingFloor tilingBathroom & kitchen tiling

Coverage Calculator

Estimate how many bags you’ll need

Area to cover (sq.ft)

sq.ft

Bags of 1 kg

Total kg (approx.)

Approx. 5-8 sq.ft of joint coverage per kg - varies with tile size and joint width.

Confirm Quantity on WhatsApp

Technical Data

Tile Grout Specification Sheet

General technical guidelines for standard site conditions - actual performance can vary with tile size, substrate and climate. Confirm exact requirements for your project with our team.

Form	Pre-mixed powder, cement based
Pack Size	1 kg pouch
Mixing Ratio	250-300 ml clean water per 1 kg powder
Pot Life	Approx. 45-60 minutes after mixing
Joint Width	Suitable for 2-8 mm joints
Cleaning Time	Wipe with damp sponge after 15-20 minutes
Full Cure	24-48 hours before water exposure
Shelf Life	12 months from date of manufacturing
Storage	Store in a cool, dry place; keep bag tightly closed

How to Apply

Step-by-Step Application Guide

Surface Preparation

Ensure joints are clean, free from dust, oil, grease and any loose particles. Tiles should be firmly fixed and the adhesive fully set before grouting.

Mixing

Mix 250-300 ml of clean water with 1 kg of Tile Grout. Stir well until you get a smooth, lump-free paste of workable consistency. Let it rest for a few minutes and re-stir.

Application

Fill the grout into the joints using a rubber float, working diagonally across the tiles for even coverage. Press firmly so joints are fully packed.

Finishing & Cleaning

Remove excess grout and clean the tile surface with a damp sponge after 15-20 minutes, before it fully sets. Buff with a dry cloth once the haze appears.